24 Diameter FootingPad Post Foundation 2-Pack

Product description FootingPad is the best foundation choice for post footers. Better than concrete! Faster, easier with less stress on labor and equipment. FootingPad is the only post footer to have gone through the extensive testing and annual inspections needed to receive ICC code compliance. ESR 2147 can be shown to any inspector to receive approval. Great for decks and post-frame buildings (pole barn) or any other structure using a post in the ground foundation. Installation does not change from normal building practices: 1. Dig your hole, level the bottom of the hole and place the FootingPad with the ribs facing up / smooth side down. Hole depth is often determined by frost line in your area. Frost depth maps are readily available or check with your local building code official. In southern climates, hole depth is more likely to be determined by the lateral support required. While many variables impact this, lateral support for attached decks is provided by the house itself. 2. Place your post on the FootingPad. The FootingPad testing and ICC compliance allows the post to be adjusted so that it can sit off center. 3. Backfill dirt around your post. For pressure treated posts, you can use PlastiSleeve to protect the wood from rot. 2018 IRC codes do not require complete concrete columns (piers). By

Highlights: Lightweight replacement for concrete Code certification by international code council evaluation services No changes to normal post construction process Maximum load of 9,327 lbs. in 3000 PSF soil

Key details: Specification Met: Yes, Meets International Code Council Standards | UPC: 805819000292 | Number of Items: 2

How it fits your day: Use the key specs and highlights above to match it to your setup, space, or routine before you check out.

Customer feedback: 1.0/5 average rating.

Product description FootingPad is the best foundation choice for post footers. Better than concrete! Faster, easier with less stress on labor and equipment. FootingPad is the only post footer to have gone through the extensive testing and annual inspections needed to receive ICC code compliance. ESR 2147 can be shown to any inspector to receive approval. Great for decks and post-frame buildings (pole barn) or any other structure using a post in the ground foundation. Installation does not change from normal building practices: 1. Dig your hole, level the bottom of the hole and place the FootingPad with the ribs facing up / smooth side down. Hole depth is often determined by frost line in your area. Frost depth maps are readily available or check with your local building code official. In southern climates, hole depth is more likely to be determined by the lateral support required. While many variables impact this, lateral support for attached decks is provided by the house itself. 2. Place your post on the FootingPad. The FootingPad testing and ICC compliance allows the post to be adjusted so that it can sit off center. 3. Backfill dirt around your post. For pressure treated posts, you can use PlastiSleeve to protect the wood from rot. 2018 IRC codes do not require complete concrete columns (piers). By using FootingPad, protecting the post and backfilling you eliminate the need to mix large amounts concrete, wait for it to cure and then haul off the excavated dirt. 4. Start building! Easy to Use - 100% recycled material - American