2pcs Arcade Harness 4 8mm 187 Microswitch Terminals 2 Pin 8-Pin to 5-pin Conversion Harness Wires for Jamma

Arcade 4.8mm (.187") Microswitch Ternimals 4.8mm Ternimals 2 Pin 8-Pin to 5-pin Conversion Harness for Jamma MAME Bartop Cabinets Machines The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick. For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness. By using this 8-Pin to 5-pin Conversion Harness, you can interface most joysticks with .187” microswitch terminals through to a Sanwa JLF-H or JST-XH cable, which makes connection simple. Feature： * Interfaces to a Sanwa JLF-H or JST-XH cable * Converts joysticks with standard .187” microswitch terminals for use with a Sanwa JLF-H or JST-XH cable. Connecting Wire Colours for QANBA Q4 RAF Crown conversion harness: RED = UP ORANGE = DOWN GREEN = LEFT YELLOW = RIGHT BLACK = GROUND

Highlights: This conversion harness is suitable for any joystick that features 4.8mm (.187") microswitch terminals. The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick. For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness. By using this 8-Pin to 5-pin Conversion Harness, you can interface most joysticks with .187” microswitch terminals through to a Sanwa JLF-H or JST-XH cable, which makes connection simple. Interfaces to a Sanwa JLF-H or JST-XH cable. Converts joysticks with standard .187” microswitch terminals for use with a Sanwa JLF-H or JST-XH cable.

Key details: Release date: September 2, 2024 | Customer Reviews: 5.0 5.0 out of 5 stars (2) 5.0 out of 5 stars | Package Dimensions: 4.88 x 3.7 x 0.91 inches; 0.63 ounces | Type of item: Video Game | Language: English | Item Weight: 0.634 ounces

What you can expect: This conversion harness is suitable for any joystick that features 4.8mm (.187") microswitch terminals. The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick. For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness. By using this 8-Pin to 5-pin Conversion Harness, you can interface most joysticks with .187” microswitch terminals through to a Sanwa JLF-H or JST-XH cable, which makes connection simple. Interfaces to a Sanwa JLF-H or JST-XH cable. Converts joysticks with standard .187” microswitch terminals for use with a Sanwa JLF-H or JST-XH cable.

Customer feedback: 5.0/5 average rating.

Review snippets: This was exactly what I needed to install the Knee Lever Neo on my F700 Elite. The wires were a little tight to install, but they didn’t snap and everything works as expected. The wires were neatly zip-tied, which helped / Great in a pinch or if you have all the necessary parts/wires but don’t want to spend a bunch of time soldering. Read more