airgoo Addressable RGB ATX Strimer S2 ARGB PSU Extension Cable Include ATX 24-pin 18AWG Wires for AG-DRGB16 SignalRGB

Product description The video showcases the product in use. The video guides you through product setup. The video compares multiple products. The video shows the product being unpacked. Airgoo Addressable RGB Strimer S2 Merchant Video How many LEDs does the Strimer have? Each Strimer has 126 LEDs total. Does it support 4-pin RGB header of the motherboard? No, it doesn't support 4-pin RGB header of motherboards, it only support 5V 3-pin argb header of motherboards, because the LEDs of the led strip are addressable rgb LEDs(built-in IC), working voltage is +5V. Why aren't all the LEDs turning on? First, please check if your LED control software has a limit on the number of LEDs. If there are no issues with the software settings, we think you may have received defective product, please apply for a replacement. Why can't light up all the LEDs by using 3-pin argb header on the motherboard? This Strimer has 126 LEDs total. Currently, most motherboards can only support up to 120 LEDs driven by the 3-pin header. For a better user experience, it is recommended to use it with our 16-port SignalRGB controller AG-DRGB16. Does this Strimer come with a controller? No, it doesn't. If you need a controller, you have to purchase it separately. Recommend buying our 16-port SignalRGB controller AG-DRGB16, can control up

Highlights: ✅ IMPORTANT: This Strimer has 126 LEDs total. Currently, the 3-pin argb header on most motherboards can only support up to 120 LEDs. For a better uer experience, it is recommended to use it with Corsair Commander Core XT or Airgoo 16-port SignalRGB controller AG-DRGB16, controller needs to be purchased separately. ✅ One Addressable RGB Power Extension Cable: Each cable come with white silicon rubber tube, overall dimension is 8.07 x 1.97 x 0.32 inches. Using environmentally friendly silicon rubber, no smell, soft, flexible, light diffusing helpful, but easily coated with dust, please note it. ✅ Using built-in ic led lamp beads: Total 126 leds, control with argb 3-pin connector (+5V, DATA, GND), each led lamp bead can be individually controlled via specialized Airgoo AG-DRGB16 Signal RGB controller or motherboard's argb 3-pin header. Working voltage is +5V, cannot use other voltages for power supply, please note it. ✅ Perfectly works with AG-DRGB16 Controller: Recommend to purchase our AG-DRGB16 Controller (Not Included) separately, compatible with SignalRGB, 16-Port independent channel for complex layered lighting setups, eliminating motherboard header limits and unifying multi-brand lighting setups effortlessly. ✅ Certified Safety: The Power Cable has Double-layer design with 18AWG wire, pass electrical test, maintain the stability of the power supply. ✅ PACKAGE INCLUDES: 1 x Addressable RGB ATX 24-Pin Power Extension Cable.

How it fits your day: Use the key specs and highlights above to match it to your setup, space, or routine before you check out.

Customer feedback: 4.3/5 average rating.

Review snippets: Bright, colorful and detailed thanks to many led lights in the strip. My Airgoo controller handles it full blown, zero problems. Would buy again. Read more / These RGB cable extensions are seriously bright! I had to turn them down in my motherboard software so they didn't outshine all of my other components. Colors are super vibrant as well. They're a good choice for budget rgb extensions

Product description The video showcases the product in use. The video guides you through product setup. The video compares multiple products. The video shows the product being unpacked. Airgoo Addressable RGB Strimer S2 Merchant Video How many LEDs does the Strimer have? Each Strimer has 126 LEDs total. Does it support 4-pin RGB header of the motherboard? No, it doesn't support 4-pin RGB header of motherboards, it only support 5V 3-pin argb header of motherboards, because the LEDs of the led strip are addressable rgb LEDs(built-in IC), working voltage is +5V. Why aren't all the LEDs turning on? First, please check if your LED control software has a limit on the number of LEDs. If there are no issues with the software settings, we think you may have received defective product, please apply for a replacement. Why can't light up all the LEDs by using 3-pin argb header on the motherboard? This Strimer has 126 LEDs total. Currently, most motherboards can only support up to 120 LEDs driven by the 3-pin header. For a better user experience, it is recommended to use it with our 16-port SignalRGB controller AG-DRGB16. Does this Strimer come with a controller? No, it doesn't. If you need a controller, you have to purchase it separately. Recommend buying our 16-port SignalRGB controller AG-DRGB16, can control up to 16 RGB devices simultaneously, each channel can support up to 256 LEDs. Customer-Customized Lighting Building with 10 pcs Airgoo ATX Strimer S2 Customer-Customized Lighting Building accessories: 1. 1 x Airgoo 16-port SignalRGB controller AG-DRGB16 2. 10 x Airgoo ARGB