APPS2Car 8Pcs 3M VHB Adhesive Sticky Pads for Dash Cam with Electrostatic Film Heat Resistant 2 15 Round

Product description How to Use Previous page Next page Warm Tip If your dashcam has a modular design, first mount the base with the adhesive pad and allow it to set for at least 24 hrs before attaching the main body. For better adhesion, please install in an environment with a temperature above 21°C (70°F) . If the weather is cold, use warm air to soften the adhesive before installation. If your fingers come into direct contact with the electrostatic film surface of dash cam side, please clean it with an alcohol wipe, ensure it's "clean, dry, and free of residue". Do not apply the 3M adhesive pad to very soft, uneven, greasy, or textured surfaces, or on leather. Please remove any residual glue and clean the surface thoroughly before application. The 3M VHB adhesive pad is for one-time use only. Please store it in a sealed container if not in use. It is recommended to wait at least 24 hrs after application before use. The longer the adhesive sets, the stronger the bond will be. Peel off the back film and press the pad firmly for at least 2 min . Then wait about 2 hrs before removing the red film. If the red film is difficult to remove, press it back down and try again. Avoid touching the

Highlights: Super Strong Adhesion: Made with 3M VHB GPH-160, these dash cam adhesive pads are engineered to withstand temperatures up to 300°F (150°C), offering exceptional strength and long-term durability. Keep your dashcam or other devices securely attached to your windshield or dashboard without worry. Adhesive Pad for Dash Cam: These 3m circle double sided adhesive pads, measuring 2.15"(55mm) round, 0.063" (1.6 mm) thick, fit most round dashcams, stick-on phone holders, and GPS devices. Designed to replace the original adhesive on mounts. No Mess & No Adhesives: Includes 4 pcs electrostatic stickers that can be easily applied to glass. This allows for hassle-free, residue-free removal of your dash cam adhesive mount, providing convenience and flexibility in your setup. Center Hole Design: Our dash cam sticky pads, with a 0.45 inch center opening, are tailor-made to enhance the vacuum seal and grip of the mount. Wide Compatibility: These 3m sticky pads also can be used as car phone holder sticky pads. Help you easily fix the phone mount to your car dashboard. Suitable for a vehicle, RV, truck, van, SUV, pickup, ect. Package Content: Includes 8pcs 2.15" round double sided adhesive pads, 4pcs electrostatic films, and 8pcs Alcohol Prep Pads.

How it fits your day: Use the key specs and highlights above to match it to your setup, space, or routine before you check out.

Customer feedback: 4.4/5 average rating.

Customers say: Customers find that the adhesive pads work fantastically for their intended purpose.

Review snippets: Couldnt keep my radar detector on my windshield in the Tennessee hot/cold every day, stuck one of these bad boys to my mount and stuck the mount to the glass for a day with no weight on it so it / Works as advertised. Read more