Comfort Zone Oscillating Desktop Heater with Remote Control for Indoor Use Adjustable Thermostat Overheat Protection Tip-Over Switch Carry

Safely Operate Your Space Heater Always operate the heater in an upright position, following the product manual's instructions. Ensure the utility heater is placed on a flat, stable surface before use. Avoid positioning the heater directly under a power outlet. For safe operation, plug the heater directly into a 120 Volts AC, 60Hz wall outlet. Make sure the plug fits tightly in the outlet to prevent overheating and potential damage to the plug or heater. Proper setup and connection are essential for safe and efficient heater performance. Overheat Protection The power indicator light, located near the control panel, lights whenever the heater or fan is turned on. The heater is equipped with an automatic overheat protection device located inside the body of the heater. If the heater grille is obstructed, or if the heater gets too hot for any reason, the automatic overheat protection device will turn the heater off. To reset the heater, simply turn power off and unplug the heater for 10 minutes until it cools down and then you may plug the heater in and restart. Be sure that the heater is on a smooth level surface with no obstructions. The heater is also equipped with a safety tip-over switch to turn power off to the heater when the heater tips over. To resume heater functions simply

Highlights: HEAT SETTINGS: Select a heat setting by pressing the MODE button on the control panel or remote control to toggle between three heat settings and fan-only mode. Heat-up mode operates at 1,500 W, and heat-down mode at 1,000 W. ECO mode is an energy-saving function that maintains a constant 68°F. The ECO LED light illuminates when this mode is active, and the room temperature falls below 68ºF/20ºC. To view the ambient temperature, press the mode button on the control panel for 5 seconds. Enjoy efficient and customizable heating with ease. ADUSTABLE THERMOSTAT: Set the temperature by pressing the arrows on the control panel or remote control. You can choose a temperature between 50°F and 90°F (10°C and 32°C). Once the desired temperature is set, the heater will stay on until the room reaches the set temperature on the digital display. It will then cycle on and off to maintain this temperature, ensuring consistent comfort. LOCK FUNCTION: Press and hold the oscillation button on the control panel for 5 seconds to lock the heater. When locked, the control panel and remote control (if provided) will not function, and the display will show “Lo.” To unlock, press and hold the oscillation button on the control panel for 5 seconds again. To engage the oscillation function using the remote, short press the oscillation

Key details: Brand: Comfort Zone | Special Feature: Adjustable Temperature, Cool Touch Exterior, Oscillating, Programmable Thermostat, Remote Control | Color: Blue | Form Factor: Tower | Indoor/Outdoor Usage: Indoor | Product Dimensions: 8.66"D x 7.48"W x 12.99"H | Recommended Uses For Product: Home, Office | Mounting Type: Freestanding | Room Type: Home Office | Heating Coverage: 150 sq. ft.

What you can expect: HEAT SETTINGS: Select a heat setting by pressing the MODE button on the control panel or remote control to toggle between three heat settings and fan-only mode. Heat-up mode operates at 1,500 W, and heat-down mode at 1,000 W. ECO mode is an energy-saving function that maintains a constant 68°F. The ECO LED light illuminates when this mode is active, and the room temperature falls below 68ºF/20ºC. To view the ambient temperature, press the mode button on the control panel for 5 seconds. Enjoy efficient and customizable heating with ease. ADUSTABLE THERMOSTAT: Set the temperature by pressing the arrows on the control panel or remote control. You can choose a temperature between 50°F and 90°F (10°C and 32°C). Once the desired temperature is set, the heater will stay on until the room reaches the set temperature on the digital display. It will then cycle on and off to maintain this temperature, ensuring consistent comfort. LOCK FUNCTION: Press and hold the oscillation button on the control panel for 5 seconds to lock the heater. When locked, the control panel and remote control (if provided) will not function, and the display will show “Lo.” To unlock, press and hold the oscillation button on the control panel for 5 seconds again. To engage the oscillation function using the remote, short press the oscillation button. TIMER FUNCTION: To set the timer for power off, start the unit and press the Timer button on the

Customer feedback: 3.9/5 average rating.

Customers say: Customers find the space heater to be of good quality and effective at heating rooms.

Review snippets: This Light weight Heater is great quality, the Functionality is great to set and forget so you don’t have a cold bathroom first thing in the morning. Read more / Powerful little heater. The reason it comes with a remote is because you can use this baby at a distance! Bit strange for a desktop model, but I put mine at the end of a long nightstand and it’s perfect.