Dash Cam Hardwire Kit Mini USB Bangjia 12V-24V to 5V 2A Car Dash Camera Charger Power Cord 11

Product description Upgraded the 3nd Generation Dash Cam Hardwire Kit This Dash Cam Hardwire Kit. Perfect for 24/7 Parking Surveillance.Low voltage protection protects against battery dying.Bangjia Dash cam hardwire kit works for almost all car mini or micro USB device, such as dash cam、mirror cam、GPS navigator and radar detector etc. Installation in minutes with little to no expertise required.11.5ft/3.5meter power cable included. Technical Details Connector: Mini USB Connector Input Voltage: DC 12V-24V Output Voltage: 5V Output Current: 2A Working Temperature:-40~ 160 Degree F Cable Length: 11.5ft/3.5m Low Voltage Protection: 11.6V for 12V vehicle; 23.5V for 24V vehicle. Safety Notes Pertorm the installation with the ignition in the OFF position. Do not strip any live wires. Correct electnical polarity and grounding is required for safe and proper installation. Only connect to a negative ground DC supply circuit. Not for installation to positive ground circuits. If you don't have experience on installing the hardwire kits for the dash cam, please ask professional for help. The main function Low Voltage Protection Set 6 high-precision resistors,Dual power-off protection chip, intelligent low-voltage protection device can read the battery voltage more accurately, When your car's voltage is lower than 11.7V or 11.6V, it will automatically turn off the power. Protect your car battery more effectively. 24 Hours Parking Surveillance The vehicle hard-wire kit connected to car

Highlights: 【Upgraded the 3nd Generation Dash Cam Hardwire Kit】 -The newly upgraded Dash Cam Hardwire Kit mini USB in 2021 has dual power-off protection functions. When your car's voltage is lower than 11.7V, the Hardwire Kit will automatically cut off the power for the first time. 11.6V will automatically cut off the power supply for the second time, thus effectively preventing the loss of the car battery voltage. 【24 Hours Surveillance】 -The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.7V or 23.5V, the regulator will cut off the power,which leaves you with enough power to start your car; 【High Secure Standards】 -The mini USB hardwire kit with built-in High Precision switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against excessive current, overheating;Input:12v - 24v, Output: 5v 2A;Input length:1.5ft, Output length:10ft.Overall 11.5ft hardwire kit can be installed basically on All vehicles. 【Extensive compatibility】 -This hard-wired kit is suitable for most models. The hard-wired kit has the function of automatically identifying the voltage. When you start the car, the hard-wired kit will automatically determine the voltage of the car (the voltage is between

How it fits your day: Use the key specs and highlights above to match it to your setup, space, or routine before you check out.

Customer feedback: 4.5/5 average rating.

Review snippets: I wanted to hard wire my dash cam to my car so I ordered this kit and it came with everything needed and more. Read more / Good quality and was easy to install Read more

Product description Upgraded the 3nd Generation Dash Cam Hardwire Kit This Dash Cam Hardwire Kit. Perfect for 24/7 Parking Surveillance.Low voltage protection protects against battery dying.Bangjia Dash cam hardwire kit works for almost all car mini or micro USB device, such as dash cam、mirror cam、GPS navigator and radar detector etc. Installation in minutes with little to no expertise required.11.5ft/3.5meter power cable included. Technical Details Connector: Mini USB Connector Input Voltage: DC 12V-24V Output Voltage: 5V Output Current: 2A Working Temperature:-40~ 160 Degree F Cable Length: 11.5ft/3.5m Low Voltage Protection: 11.6V for 12V vehicle; 23.5V for 24V vehicle. Safety Notes Pertorm the installation with the ignition in the OFF position. Do not strip any live wires. Correct electnical polarity and grounding is required for safe and proper installation. Only connect to a negative ground DC supply circuit. Not for installation to positive ground circuits. If you don't have experience on installing the hardwire kits for the dash cam, please ask professional for help. The main function Low Voltage Protection Set 6 high-precision resistors,Dual power-off protection chip, intelligent low-voltage protection device can read the battery voltage more accurately, When your car's voltage is lower than 11.7V or 11.6V, it will automatically turn off the power. Protect your car battery more effectively. 24 Hours Parking Surveillance The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off. Fuse Puller One free fuse puller inside the storage box for easy picking. Scope