Dash Cam Hardwire Kit USB C 12V-24V to 5V 3A Adapter Power Cable with Voltage Display 24 7

Product description Pre-Purchase Guide: Installation: Red → ACC | Yellow → BAT+ | Black → Ground. Compatibility: Standard signal: A5B5 . For A8B8 dash cams, use the included adapter cable . Features: Smart Parking Mode: Activates 3-5 min after engine off. Voltage Display: Accuracy: ±0.2V (Low) / ±0.3V (High) . Low Voltage Protection： Automatically delays shutdown for 5 minutes after voltage drops below the set value ( default: 11.6V ). prevents your dash cam from powering off during auto start-stop cycles or temporary voltage dips, to ensure continuous recording and to help protect your car battery from excessive drain. Upgraded Gen 3 USB-C Hardwire Kit: 11.6V Auto Cutoff (12-24V) & 24/7 Parking Mode Key Features: Compatible Devices：dash cam, car play ,mirror dashcam,car camera, GPS, radar detector and more Power Supply：fuse taps Additional Features：Voltage Display,Adjustable Battery Protection,24/7 Parking Monitoring,Acc mode,Anti-interference Magnetic Ring, Easy intallation Package Contents: 3-lead hardwire dash cam kit,2x4 Fuse tap connectors,Short Type-C conversion cable (A/B5toA/B8),InstallationManual,installation tools,4pcsCable tie Technical Specs: Connector: USB type C Output :DC5V/3A MAX Support 1-3A Operating Tem:-20℃/-4℉-+60℃/140℉ Cable Length:11.5ft/3.5m Low Voltage Protection: 12V(11.8V);24V(23.6V) Conversion Efficiency:Maximum Value 96% Dash Cam Connection Issues? Quick Troubleshooting Guide ！！！ Follow the steps below to quickly diagnose and resolve common problems. Verify Wiring: Red → ACC (Ignition-Powered) Yellow → BAT+ (Constant Battery Power) Black → Ground (Metal Screw/Body) Voltage Check:

Highlights: 24/7 Parking Monitor: This power adapter system provides 24/7 parking surveillance, recording incidents like hit-and-runs, vandalism, or theft while your vehicle is off to protect your car and provide crucial evidence. Smart 4-Level Voltage Protection :The dash cam power cable ensures 24 hr dash cam security without a dead battery. Simply select the cutoff ((11.6V/11.9V/12.2V/12.5V) for your battery and climate; the hard wire kit set auto-disconnects to ensure your engine starts Real-Time Voltage Display: The built-in screen lets you monitor your battery's voltage at a glance, helping to prevent dead batteries, park with confidence, and quickly diagnose electrical issues Universal Compatibility: This ACC hardwire kit works with all 12V-24V vehicles—from cars and trucks to large commercial vehicles—delivering continuous power to your USB-C dash cam. Note: This hardware kit uses the standard A5B5 signal. For dash cams that require an A8B8 signal (as some RO.VE or Rediger models ), simply connect using the included A8B8 adapter cable. ACC Detection: Built-in screen shows your car battery's health at a glance.Automatically switches between Parking mode and Driving mode. No manual setup! Withstands engine start-stop surges for stable performance Noise-Reducing Ferrite Core: This Anti-Interference ring acts as a filter to block electrical interference from your car, providing clean power for sharper video and clearer audio—so you capture undeniable evidence Easy Installation: Eliminate bulky cigarette

How it fits your day: Use the key specs and highlights above to match it to your setup, space, or routine before you check out.

Customer feedback: 4.5/5 average rating.

Customers say: Customers find the hardwire kit works well with VIOFO dash cams and appreciate its simple installation process.

Review snippets: he Dash Cam Hardwire Kit is a fantastic accessory—easy to install with clear instructions and solid build quality. I especially love the adjustable voltage settings, which make it simple to protect my car battery while keeping my dash cam powered / I had this installed in my truck and it works wonders. The man that installed it said it was of excellent quality and was easy to install. Read more

Product description Pre-Purchase Guide: Installation: Red → ACC | Yellow → BAT+ | Black → Ground. Compatibility: Standard signal: A5B5 . For A8B8 dash cams, use the included adapter cable . Features: Smart Parking Mode: Activates 3-5 min after engine off. Voltage Display: Accuracy: ±0.2V (Low) / ±0.3V (High) . Low Voltage Protection： Automatically delays shutdown for 5 minutes after voltage drops below the set value ( default: 11.6V ). prevents your dash cam from powering off during auto start-stop cycles or temporary voltage dips, to ensure continuous recording and to help protect your car battery from excessive drain. Upgraded Gen 3 USB-C Hardwire Kit: 11.6V Auto Cutoff (12-24V) & 24/7 Parking Mode Key Features: Compatible Devices：dash cam, car play ,mirror dashcam,car camera, GPS, radar detector and more Power Supply：fuse taps Additional Features：Voltage Display,Adjustable Battery Protection,24/7 Parking Monitoring,Acc mode,Anti-interference Magnetic Ring, Easy intallation Package Contents: 3-lead hardwire dash cam kit,2x4 Fuse tap connectors,Short Type-C conversion cable (A/B5toA/B8),InstallationManual,installation tools,4pcsCable tie Technical Specs: Connector: USB type C Output :DC5V/3A MAX Support 1-3A Operating Tem:-20℃/-4℉-+60℃/140℉ Cable Length:11.5ft/3.5m Low Voltage Protection: 12V(11.8V);24V(23.6V) Conversion Efficiency:Maximum Value 96% Dash Cam Connection Issues? Quick Troubleshooting Guide ！！！ Follow the steps below to quickly diagnose and resolve common problems. Verify Wiring: Red → ACC (Ignition-Powered) Yellow → BAT+ (Constant Battery Power) Black → Ground (Metal Screw/Body) Voltage Check: Kit display should read 11.8V-12.8V (engine off). If blank or too low, reseat the fuse tap firmly. Scenario A: Direct Compatibility (A5B5) Compatible with A5B5 Dash Cams, this hare wire kit is designed for dash cams using the A5B5 signal