De-ntal Wet Model Trimmer Abrasive Disc Gypsum Arch Inner Disc Wheel Dry Model Trimmer De-ntal Lab Equipment

1. Connect one end of the water tube to the auger of the moist coupon and the other end of the tap, open the valve. 2. Connect the tube for the disposal of waste to the unit. 3. Connect the power cord and turn on the power switch (o = off, l = on) 4. When braking, it is normal to hear a click before the sand tablet stops. If the sandy tablet emits unusually strong noises, remove it and use the hexagonal key included to adjust the screw on the rear cover (18). 5. To check if you need to replace the abrasive disc, manually rotate the disc and evaluate: if the platform jumps more than 2 mm, replace the disc. After replacing the disc, be sure to tighten the ring on platform 8 (closer outside the sand table). Specifications: Voltage: 220 V/50 Hz ± 10%, 110 V/60 Hz ± 10% Power: 500 W Rotation speed: 2800 rpm Dimensions: 44 × 35 × 35 cm Dental finishing weight: 20 kg Problems to kill If you hear any noise anomalous during work Possible reason: ① The axon is being lost ② The disc is not clear enough. How to solve it: ①Slamm the disc⒃ with the key, take the shot Strait ring; ② changes the disc. The car does not

Highlights: ✔ 【Create Details】 Dental models require the creation of complex structures and shapes in specific areas to ensure precision. A humid models finish helps to obtain these fine details. ✔ 【Improve efficiency】 Use the finishing refiner to cut quickly and precisely, saving time and improving efficiency. It is usually faster and more coherent than manual cutout. ✔ 【The finer for high quality dental models has a longer duration and can resist frequently without damage. ✔ 【To maintain a clean work environment, our fingerr is equipped with a powder removal capable of removing the particles produced. ✔ 【Adjustable speed】 This type of finish has adjustable speed settings to adapt to different types of dental models and finishing requirements.

Key details: Package Dimensions: 1.18 x 0.79 x 0.39 inches | Item Weight: 22 pounds | Department: Unisex Adult | Assembly required: No | Number of pieces: 1

What you can expect: ✔ 【Create Details】 Dental models require the creation of complex structures and shapes in specific areas to ensure precision. A humid models finish helps to obtain these fine details. ✔ 【Improve efficiency】 Use the finishing refiner to cut quickly and precisely, saving time and improving efficiency. It is usually faster and more coherent than manual cutout. ✔ 【The finer for high quality dental models has a longer duration and can resist frequently without damage. ✔ 【To maintain a clean work environment, our fingerr is equipped with a powder removal capable of removing the particles produced. ✔ 【Adjustable speed】 This type of finish has adjustable speed settings to adapt to different types of dental models and finishing requirements.

Customer feedback: 5.0/5 average rating.