PUAIDA / Wheels
Dual Motor Set for Electric Skateboard 90mm Powered 10S 36V DIY Brushless Hub Motor Kit for Longboard Upgraded
Prices are shown for browsing. Purchases are currently unavailable.
Dual Motor Set for Electric Skateboard 90mm Powered 10S 36V DIY Brushless Hub Motor Kit for Longboard Upgraded, $254.40, Availability unknown. Image 1 of 5.
- Selected option
- Dual Motor Set for Electric Skateboard 90mm Powered 10S 36V DIY Brushless Hub Motor Kit for Longboard Upgraded
- SKU
- JC8987
Source specifications
- Brand
- PUAIDA
- Color
- Black
- Age Range (Description)
- Adult
- Skill Level
- All
- Deck Length
- 970 Centimeters
- Deck Width
- 10 Inches
- Item Weight
- 4.5 Kilograms
- Material
- Polyurethane
- Wheel Size
- 90 Millimeters
- Wheel Material
- Polyurethane
The details
About this item
Product description Model DM400 Voltage 36V Idle speed 2900±5% rpm load speed 2550±5% rpm The rated torque ≥1.15 N.m Rated current ≤11 A Effective rate ≥76% Maximum permissible power 400 W Working system S2 60 (min) Protection grade IP33 Insulation class E Phase Angle 120° The stator slot number 18 The number of the rotor 20 Tire removal 1. Remove the five screws using a wrench 2. Remove the protective cover 3. Remove the tire When taking out the tire, you can gently knock out part of the tire with a small hammer and then take it by hand. The protective cover plate can be used to be removed with the tire. Tire installation 1. Load the tire into the motor, and pay attention to align the through-hole of the tire skeleton with the corresponding threaded hole of the motor 【Upgraded】Puaida upgraded 90mm Powered Dual Hub Motor Kit DIY Electric Skateboard set,compatible with dual hub motor esc ,not compatible with belt drive esc,for vesc you need to know how to set the parameters; 【30mph】77kv ,With Puaida's ESC , its running speed goes up to 30 mph and it’s strong enough to climb a 25% steep hill.,please note that you may get much lower top speed if you are not using the puaida's esc ,and
- 【Upgraded】Puaida upgraded 90mm Powered Dual Hub Motor Kit DIY Electric Skateboard set,compatible with dual hub motor esc ,not compatible with belt drive esc,for vesc you need to know how to set the parameters
- 【30mph】77kv ,With Puaida's ESC , its running speed goes up to 30 mph and it’s strong enough to climb a 25% steep hill.,please note that you may get much lower top speed if you are not using the puaida's esc ,and if you are a heavier rider ,you may also get a bit lower speed.
- 【Elastic PU】Black longboard wheel is made of high elastic PU material, more durable and longer life
- 【Assembled】All the parts are assembled,easy to install on the electric skateboard, You can diy an longboard or short board and make your own skateboard
- 【High Load Capacity】The maximum load capacity reaches 220.46 lbs, allowing every rider to electric skateboard happily!
Product information
Materials and care
- Material
- Polyurethane
- Wheel Material
- Polyurethane
From the manufacturer
Product details
Product description Model DM400 Voltage 36V Idle speed 2900±5% rpm load speed 2550±5% rpm The rated torque ≥1.15 N.m Rated current ≤11 A Effective rate ≥76% Maximum permissible power 400 W Working system S2 60 (min) Protection grade IP33 Insulation class E Phase Angle 120° The stator slot number 18 The number of the rotor 20 Tire removal 1. Remove the five screws using a wrench 2. Remove the protective cover 3. Remove the tire When taking out the tire, you can gently knock out part of the tire with a small hammer and then take it by hand. The protective cover plate can be used to be removed with the tire. Tire installation 1. Load the tire into the motor, and pay attention to align the through-hole of the tire skeleton with the corresponding threaded hole of the motor when it is fast in place. 2. Reverse install the protective cover to the end face of the tire support frame, and pay attention to the alignment of several holes. 3. Tighten the five screws using a wrench. Remote and ESC kit Dual motor set Pad and risier Tail lights and LED module Sleeve for motor Buying Options Add to Cart Add to Cart Add to Cart Buying Options Customer Reviews — 3.8 out of 5 stars 43 4.3 out
Highlights: 【Upgraded】Puaida upgraded 90mm Powered Dual Hub Motor Kit DIY Electric Skateboard set,compatible with dual hub motor esc ,not compatible with belt drive esc,for vesc you need to know how to set the parameters 【30mph】77kv ,With Puaida's ESC , its running speed goes up to 30 mph and it’s strong enough to climb a 25% steep hill.,please note that you may get much lower top speed if you are not using the puaida's esc ,and if you are a heavier rider ,you may also get a bit lower speed. 【Elastic PU】Black longboard wheel is made of high elastic PU material, more durable and longer life 【Assembled】All the parts are assembled,easy to install on the electric skateboard, You can diy an longboard or short board and make your own skateboard 【High Load Capacity】The maximum load capacity reaches 220.46 lbs, allowing every rider to electric skateboard happily!
Sizes may include: S, M, L, XL.
Customer feedback: 3.8/5 average rating.
Customers say: Customers find the electric skateboard motors to be of high quality.
Review snippets: I'm using these (slightly modified with a 3d printed end to hold 2 opposite end bearings) to power a rail cart. I've run them hard for the past 2 months without a hiccup. I use them with their esc control / The media could not be loaded. This was my very first build, so I was scared to buy these with so little feedback. I was pleasantly surprised! I've got my board up to 19MPH so far on speed 3 out
Product description Model DM400 Voltage 36V Idle speed 2900±5% rpm load speed 2550±5% rpm The rated torque ≥1.15 N.m Rated current ≤11 A Effective rate ≥76% Maximum permissible power 400 W Working system S2 60 (min) Protection grade IP33 Insulation class E Phase Angle 120° The stator slot number 18 The number of the rotor 20 Tire removal 1. Remove the five screws using a wrench 2. Remove the protective cover 3. Remove the tire When taking out the tire, you can gently knock out part of the tire with a small hammer and then take it by hand. The protective cover plate can be used to be removed with the tire. Tire installation 1. Load the tire into the motor, and pay attention to align the through-hole of the tire skeleton with the corresponding threaded hole of the motor when it is fast in place. 2. Reverse install the protective cover to the end face of the tire support frame, and pay attention to the alignment of several holes. 3. Tighten the five screws using a wrench. Remote and ESC kit Dual motor set Pad and risier Tail lights and LED module Sleeve for motor Buying Options Add to Cart Add to Cart Add to Cart Buying Options Customer Reviews — 3.8 out of 5 stars 43 4.3 out of 5 stars 36 3.8 out of 5 stars 9 — Price — no data $159.00 $ 159 . 00 $9.90 $ 9 . 90 $29.90 $ 29 . 90 — no data Brand PUAIDA PUAIDA PUAIDA PUAIDA PUAIDA See