Grooved Sediment Water Filter Cartridge by Ronaqua 10x 2 5 Four Layers of Filtration Removes Sand Dirt Silt

Product description Melt-blown Four Layers Filtration Polypropylene Grooved Sediment Filter (25 pack) A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water

Highlights: 💎 Industry Standard 10-inch 1 Micron Sediment Filter - Used for effectively removing most sediments, cysts, chlorine, and fluorides. The grooved surface area allows greater dirt holding capacity and a longer lifespan. Key Product Features 💎 This filter is ideal for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with a 10 inch housing and WELL-MATCHED Models of Cartridges: Dupont PFC5002,DuPont WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14, RS14-SD, RS14-DS and RS14-SS, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05 💎 Product Lifespan: Replace two or three times a year - depending on your water quality 💎 This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 10 inches x 2.5 inches (24.4 cm x 6.35 cm) 💎 WELL-FIT FOLLOWING HOUSINGS AND REVERS OSMOSIS WATER FILTER SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2; iSpring RCC7AK, Global Water RO-505, RO5DX, APEC ROES-50-A, SimPure RPWROKSN075HDB

Key details: Material: Polypropylene (PP) | Product Dimensions: 3"D x 3"W x 10"H | Item Weight: 7 pounds | External Testing Certification: NSF | Product Benefits: The grooved surface area allows greater dirt holding capacity and a longer lifespan, effectively removing most sediments, rust, particles, dirt and silt | Brand: Ronaqua | Set Name: 25 Pack | UPC: 780347036381 | Unit Count: 25 Count | Compatible Water Purifier Models: 3M AP101T, 3M AP11T, Whirlpool WHKF-GD05

How it fits your day: Use the key specs and highlights above to match it to your setup, space, or routine before you check out.

Customer feedback: 4.8/5 average rating.

Customers say: Customers find the water filter to be of good quality and say it works well.

Review snippets: The product was as advertised and arrived very quickly. I put on into service and it is working as expected. Will buy again when the supply becomes close to being depleted. The price was great also. Read more / Excellent filters! Do an awesome job filtering water from the cistern! Will buy again. Read more

Product description Melt-blown Four Layers Filtration Polypropylene Grooved Sediment Filter (25 pack) A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. The main difference between a Grooved Sediment Filter and a regular Sediment Filter is the surface area; the Grooved Sediment has a larger surface