iSpring FC15 5 Micron 10 Replacement CTO Carbon Block Water Filter Cartridge for Under Sink Reverse Osmosis RO

This iSpring FC15 carbon block CTO filter cartridge reduces fine sediment and chlorine taste and odor in drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 1 gallon per minute (gpm). this cartridge is made of bonded powdered activated carbon (Pac) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The cartridge has an initial pressure drop of 3.4 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees c). this carbon block filter cartridge meets national Sanitation foundation/American national standards institute (nsf/ansi) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Highlights: Protect Your Family and Household Appliance from Chlorine and More: Say goodbye to smelly, bad tasting water! The FC15 carbon block filter is specially designed to remove up to 99% of chlorine from water as well as various natural organic compounds, taste and odor compounds, and synthetic organic chemicals. Individually wrapped, standard sized 10” x 2.5”, high capacity activated carbon block (CTO, Chlorine, Taste, and Odor) replacement filter cartridge for iSpring water systems and most industry standard 10” reverse osmosis RO and under sink systems 5 micron coconut shell carbon and compact fabrication tech to achieve maximum filtration efficiency and filter life. Activated carbon is an effective adsorbent because it is a highly porous material and provides a large surface area to which contaminants may adsorb Peace of Mind Customer Service: Register online to activate your manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help! Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.

Key details: Material: Carbon Block | Product Dimensions: 3"D x 10"W x 3"H | Item Weight: 9.9 ounces | External Testing Certification: ANSI | Product Benefits: Removes Chlorine, various natural organic compounds, taste and odor compounds, and synthetic organic chemicals | Brand: iSpring | Manufacture Year: 2018 | Set Name: iSpring FC15 CTO Carbon Filter | UPC: 662425070275 | Global Trade Identification Number: 00662425070275

How it fits your day: Use the key specs and highlights above to match it to your setup, space, or routine before you check out.

Customer feedback: 4.6/5 average rating.

Customers say: Customers find the water filtration system easy to install and appreciate its taste, with one noting it's better than faucet mount filters.

Review snippets: iSpring's countertop water drinking filter is hands down one of the best purchases I’ve ever made. The carbon filter is huge, sturdy, and easy to set up. Compared to those flimsy pitchers that break after a month of use, this / Very good quality, works as expected, good price and arrived earlier than expected. Read more

From the manufacturer iSpring Carbon Block Filter (CTO) uses high quality coconut shell carbon and reduces fine sediment, chlorine taste and odor. Please note: This countertop water filtration system DOES NOT lower TDS value, instead it will keep healthy minerals in your water. If you are interested in a filter that eliminates TDS, please consider our iSpring tankless under sink Reverse Osmosis (RO) system RO500 or countertop RO water filter system RCT600. Installation Step 1 Remove the aerator if the faucet has one, and determine if your faucet has inner threads or outer threads. Installation Step 2 For faucets with internal threads, use the metal adapter and 2 sealing washers to connect the diverter valve to the faucet. For faucets with external threads, place the sealing washer into the diverter valve of the filter and connect to the faucet. Installation Step 3 Turn the diverter handle in line with the connector for regular tap water. Turn the diverter handle perpendicular to the connector for filtered water. Installation Step 4 To flush out the loose carbon, keep the faucet on for a couple of minutes until the filtered water runs clear. Step 1 Step 2 Step 3 Step 4 CKC1 CT10 DF2 US31 CKC2 Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 4,854 4.6 out of 5 stars 4,854 4.2 out of 5 stars 1,111 4.5 out of 5 stars 1,908 4.6 out of 5 stars 4,854 Price $38.02 $ 38 . 02 $71.99 $ 71 .