Multi-Function Dashboard Camera Hard-Wired Installation kit Supports 24-Hour Parking Monitoring and Low Voltage Protection USB-C 5V 1A 3A

Product description Introduction to Hardwire Kit Connections Parking monitoring 1.Connects directly to the battery for 24-hour continuous power to prevent car theft in the parking lot. 2.Connects directly to the ignition wires for power only so it goes along with the ignition switch. Compatible with 12 - 24 volt vehicles This hardwired kit accepts voltage from any type of vehicle and operates from 12 - 24V, making it ideal for continuous powering of cars, trucks, buses, SUV's, or large trucks. low voltage protection Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.8V(12V cars) or 23.2V(24V cars), thus preventing it draining the battery. Mounting position Note: The location of the fuse box may not be the same in different models, please install according to the actual Fuse box installation schematic (for reference only) Pictures for reference only Open the car fuse box. Pictures for reference only Finding the right size connector Pictures for reference only Connect the ACC power and ground wires Pictures for reference only Each car disassembles the fuse box will have the corresponding chart position display sticker on the back of the cover Hardwiring Kit Installation Guide (Simplified version) For 12-24V DC Vehicles Safety Preparation Turn off engine, remove keys. Disconnect battery negative terminal (optional but recommended).

Highlights: UNLOCK PARKING MODE & CLEAN INSTALL: Enables your dash cam's vital Parking Mode surveillance and provides a permanent, clutter-free power solution by hardwiring directly into your vehicle's fuse box (requires your dash cam's USB-C cable). SMART LOW VOLTAGE PROTECTION (LVP): Automatically cuts power to your dash cam when your car battery drops to a safe preset voltage (e.g., 11.8V, 12V). Prevents dead batteries, ensuring your car starts reliably after extended parking mode use. UNIVERSAL USB-C COMPATIBILITY: Designed for seamless integration with ANY dash cam powered by a standard USB-C port. DUAL POWER OUTPUT (1A/3A) & WIDE INPUT RANGE: Intelligently delivers optimal 5V power at 1A or fast 3A charging. Handles input from 12V (standard cars) to 30V (trucks/RVs) for versatile vehicle compatibility. SAFE & RELIABLE POWER CONVERSION: Provides stable, regulated 5V power to your dash cam, protecting it from vehicle electrical fluctuations. Essential for continuous operation and capturing critical evidence during incidents.

How it fits your day: Use the key specs and highlights above to match it to your setup, space, or routine before you check out.

Customer feedback: 4.3/5 average rating.

Review snippets: Just what you need for your dash cam to hook to the battery. Read more / Awesome.....easy instalation for basically any fuse type Read more

Product description Introduction to Hardwire Kit Connections Parking monitoring 1.Connects directly to the battery for 24-hour continuous power to prevent car theft in the parking lot. 2.Connects directly to the ignition wires for power only so it goes along with the ignition switch. Compatible with 12 - 24 volt vehicles This hardwired kit accepts voltage from any type of vehicle and operates from 12 - 24V, making it ideal for continuous powering of cars, trucks, buses, SUV's, or large trucks. low voltage protection Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.8V(12V cars) or 23.2V(24V cars), thus preventing it draining the battery. Mounting position Note: The location of the fuse box may not be the same in different models, please install according to the actual Fuse box installation schematic (for reference only) Pictures for reference only Open the car fuse box. Pictures for reference only Finding the right size connector Pictures for reference only Connect the ACC power and ground wires Pictures for reference only Each car disassembles the fuse box will have the corresponding chart position display sticker on the back of the cover Hardwiring Kit Installation Guide (Simplified version) For 12-24V DC Vehicles Safety Preparation Turn off engine, remove keys. Disconnect battery negative terminal (optional but recommended). Locate Fuse Box Common locations: Under steering wheel dash or behind glove box (check vehicle manual). Wiring RED (ACC) → IGNITION FUSE Use fuse tap in empty slot or replace same-rated fuse (5A recommended). BLACK (GND) → Bolt to bare