Sinoacc Smart Watch Charger for Skg Letsfit Cubitt Yamay Willful Fitpolo Tozo Wyze Umidigi Blackview 3 3Ft USB

Product description The charging cable is only suitable for watches with a charging spacing of 2.84MM (0.11IN). Therefore, to make sure the charging cable can fit your watch, please follow the steps below to measure the charging spacing of your watch using the USB-A (Type A) plug and USB-C (Type C) plug. If it is the same as the picture, it will fit; if not, it will not fit. Many charging cables that resemble this one, but they are not the same charge spacing (our charge cable spacing is 2.84mm), make sure you check the charge spacing of your watch to avoid incompatible. Can use the USB A plug to judge the spacing of the charging ports The relationship between the charging cable and the USB A plug is shown in the image. You can test your charging cable with the USB A plug . You can also test the charging port on the back of your watch. Can use the USB C plug to judge the spacing of the charging ports The relationship between the charging cable and the USB C plug is shown in the image. You can test your charging cable with the USB C plug. You can also test the charging port on the back of your watch. Using a USB-A (Type A) plug to measure

Highlights: Please note: To ensure that the charging cable can charge your watch,we will send you two charging cables [one black (S-+N) and one white (S+- N)] with opposite polarity.Only one charger is compatible.If the black charging cable does not support your watch,please try a white charging cable. Attention: OnIy suitable for spacing of 0.11in(2.84MM).Not for 0.16in(4MM) or others.Can use the plug of USB-A(Type-A) to measure the spacing(Refer to picture 2).Step 1：Compare the USB-A plug's long side with the watch's charging port.Step 2：Compare the plug's short side (part) with the watch's charging center point.If same as the picture,it fits；if not same, it not fits.Please refer to the other pictures to check the compatible model of the watch. The following watches are not compatible, do not buy them:AcclaFit、Aeac、AGPTEK LW11、AGPTEK LW31、AZTTKIA、Blackview、BIGGERFIVE etc.(For more incompatible models, please refer to the Product Description) Fast Charging Speed:Design to charge your smartwatch as fast as an original charger cable.Do not worry this replacement charging cable is wasting precious time. Enhanced Durability:With 6000+ bend lifespan and reinforced cable joint, this charger is more than ready to handle the stresses and strains of daily use. Safety & Reliability:Charging Cord includes built-in over-current, over-voltage, short-circuit and over-temperature protection.Premium Quality Copper Wire and Pin Gold-Plated ensure charging safety and reliability. What You Get: 3.3Ft replacement smart watch charger cable [ one

Key details: Brand: Sinoacc | Connector Type: USB Type A | Cable Type: USB | Compatible Devices: Wyze（Model: 44mm/47mm）、Willful（Model: SW021、SW023、SW025、ID205L、ID205S、ID216）、Letsfit（Model: ID205L、ID205S、ID206、EW1、IW1）、YAMAY（Model:ID205L、ID205S、ID205U、SW021、SW023、SW025、ID206、ID216 （not for YAMAY SW022））、Letscom（Model: ID205L、ID205S、ID205U、ID205G、ID206、ID216、GT01）、UMIDIGI（Model:Uwatch 3S、Uwatch3、Uwatch3 GPS、Uwatch 2S、Uwatch2、UFit、Urun、Urun S）、Fitpolo（Model: ID205L、ID205S、ID205G、GT01）、VeryFitPro（Model:ID205L、ID205S、ID205G、ID205U、ID206、GT01）、Lintelek（Model:ID205S、ID205L）、Dirrelo（Model: GT01、ID206）、LIFEBEE（Model:ID205L、ID205S、ID205U）、T42 series（KASEEMI T42、ANDFZ T42、OUFUNI T42、Bakeey T42、TBITD T42 Smart Watch）、IDW13 series（TOOBUR IDW13、VRPEFIT IDW13、TEMINICE IDW13、Konitee IDW13、Faweio IDW13、Amzhero IDW13 Smart Watch.） | Special Feature: Fast Charging，Charging contact spacing is 2.84 mm (0.11 in)(Please refer to the images for measurement) | Compatible Phone Models: smart watch | Recommended Uses For Product: Charging | Color: Black | Connector Gender: Male-to-Male | Shape: Round

Sizes may include: S, M, L, XL.

Customer feedback: 4.2/5 average rating.

Customers say: Customers find the charging cable to be a great value and appreciate its length.

Review snippets: The charging cable works better than the original,it is longer,so it makes it easier to charge,the package comes with 2 dufferent chargers,only one will fit the watch,the seller does that bc if one won t fit your watch the other / So far, I am very happy with this charging cable. It works perfectly! The original cable that came with my Smartwatch was extremely flimsy and very short. This new cable is 3 feet long so it makes it easy to

Product description The charging cable is only suitable for watches with a charging spacing of 2.84MM (0.11IN). Therefore, to make sure the charging cable can fit your watch, please follow the steps below to measure the charging spacing of your watch using the USB-A (Type A) plug and USB-C (Type C) plug. If it is the same as the picture, it will fit; if not, it will not fit. Many charging cables that resemble this one, but they are not the same charge spacing (our charge cable spacing is 2.84mm), make sure you check the charge spacing of your watch to avoid incompatible. Can use the USB A plug to judge the spacing of the charging ports The relationship between the charging cable and the USB A plug is shown in the image. You can test your charging cable with the USB A plug . You can also test the charging port on the back of your watch. Can use the USB C plug to judge the spacing of the charging ports The relationship between the charging cable and the USB C plug is shown in the image. You can test your charging cable with the USB C plug. You can also test the charging port on the back of your watch. Using a USB-A (Type A) plug to measure the charging spacing of your watch.If it is about the same as the picture, it will be fit; Otherwise, it will not be fit. Step 1 The long side of the USB-A will be about the same length as the