Sumi Living Mini Heat Gun Electric Phone Repair Heat Tool Compact Hot Air Gun for DIY Embossing Shrink

Features: Material: Stainless Steel + ABS Size: 225*45mm/8.86*1.77in Type: Constant temperature Working Temperature: It can reach at about 200°C / 390°F within a few seconds Rated Power: 300W Power Type: AC power supply Rated Voltage: 110v Frequency: 50-60Hz Plug Type: US plug Power Cable Length: 98cm/38 inch Packing Included: 1 * Hot Air Gun 1 * User Manual Notes: 1. This kind of gun can not adjust the temperature but it heats up quickly at about 200°C theoretically. 2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion. 3. Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed. 4. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun. 5. Caution with child ! ! ! Please minor children in the safe use of hot air gun under the guidance of an adult to accompany! 6. Do not use it continuously for more than 10 minutes to avoid overheating the machine! 7. Do not touch the hot nozzle when using or just after use.

Highlights: ★ Material ★: Hot air shrink gun was made of high-quality stainless steel and ABS plastic, Dimensions 225*45mm / 8.86*1.77in ★ Voltage & Cooling Holes ★: Voltage 110V, the temp of the nozzle could reach 200℃ in seconds. The heat vents of the heat gun tail can decrease the internal high temp and extend the life! ★ Suitable for ★: heating shrinkable film, embossed powder, rubber stamp, scented candle making. Built-in stand for self-support and tabletop use! ★ Handing part ★: adopts salient point nonskid designs that cause safe handholding with small energizing! ★ Warm Tips ★: The temp of the nozzle could reach 200℃ in seconds, please don't use it for more than 10 minutes at one time. 12-month Warranty, [100% Satisfied Guarantee] If you're not happy for any reason, simply contact us!

Key details: Part Number: SL1001A | Item Weight: 8.8 ounces | Product Dimensions: 8.9 x 1.8 x 0.7 inches | Is Discontinued By Manufacturer: No | Color: Heat Gun | Material: ABS | Power Source: ac | Voltage: 110 Volts | Maximum Power: 300 Watts | Temperature Range: 150-220 Degrees Celsius

What you can expect: ★ Material ★: Hot air shrink gun was made of high-quality stainless steel and ABS plastic, Dimensions 225*45mm / 8.86*1.77in ★ Voltage & Cooling Holes ★: Voltage 110V, the temp of the nozzle could reach 200℃ in seconds. The heat vents of the heat gun tail can decrease the internal high temp and extend the life! ★ Suitable for ★: heating shrinkable film, embossed powder, rubber stamp, scented candle making. Built-in stand for self-support and tabletop use! ★ Handing part ★: adopts salient point nonskid designs that cause safe handholding with small energizing! ★ Warm Tips ★: The temp of the nozzle could reach 200℃ in seconds, please don't use it for more than 10 minutes at one time. 12-month Warranty, [100% Satisfied Guarantee] If you're not happy for any reason, simply contact us!

Customer feedback: 4.4/5 average rating.

Customers say: Customers find the heat gun works well, with one mentioning it's particularly effective for wire shrink wraps, and they appreciate its compact size and ease of handling.

Review snippets: Works great and directs heat right where you need it. I used it to remove a broken phone screen on a Google Pixel. Does a good job at loosening up stiff gaskets, old caulking, ect. Read more / Work good and don't get melting Read more