Tier1 1 Micron 10x4 5 Water Filter Spun Wound Polypropylene Whole House Sediment Water Filter Replacement for Pentek

Product description Whole house water filter systems are placed on the main water line entering your home, and designed to remove rust, sediment, chlorine and other chemical contaminants from all water entering your home. So no matter where you are in your house, whether it’s the guest bedroom shower, outside hose, kitchen or bathroom sink, you and your family can have clean, healthy and great tasting water. Not only does a whole house water filter give you the luxury of clean great tasting water from every faucet in the house it can also help extend the life of appliances that use water, such as dishwashers, water heaters and washing machines, because it removes the sediment, chlorine and other contaminants that would otherwise be entering those appliances. Specifications Features Actual Size: 10 inches (length) x 4 1/2 inches (outside diameter) Media: Bonded Polypropylene Filter Life: 6 months Micron: 1 Flow Rate: 10 Designed to Fit Fits most standard 10 x 4.5-inch housings Contaminants Removed Particulates Sediment Comparable Part Numbers P1-10BB HYDRONIX SDC-45-1001 PENTEK-DGD-2501 SDF-45-1001 155359-43 TIER1-P1-10BB FPMB-BB1-10 Easy Installation 1. Turn off water supply. Press red pressure-relief button (if present) 2. Unscrew housing. Remove large o-ring, wipe clean and set aside 3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse

Highlights: COMPATIBLE REPLACEMENT MODELS – Designed to fit standard 1 Micron 10 x 4.5 sediment water filter is a replacement for Pentair DGD-2501, 155359-43, SDC-45-1001, P1-10BB, FPMB-BB1-10, and SDF-45-1001; fits most 10” x 4.5” whole house filter housings. 1 MICRON DEPTH SEDIMENT FILTRATION – Spun wound polypropylene construction captures fine particles throughout the cartridge depth, helping reduce rust, sand, silt, dirt, and scale commonly present in well water and municipal water systems. FINE SEDIMENT POLISHING DESIGN – The graded density depth structure traps larger debris on the outer layers while finer particles are captured deeper inside, making 1 micron filtration ideal for sediment polishing ahead of downstream filters. SERVICE LIFE VARIES BY WATER CONDITIONS – Replacement frequency depends on sediment levels, water quality, and micron rating; finer filters capture smaller particles more quickly, so monitoring flow or pressure changes helps determine when cartridge replacement is needed. IDEAL WHOLE HOUSE PRE-FILTER – Commonly installed as a first-stage or entry-point sediment filter to help protect plumbing, appliances, water softeners, and carbon filters from fine sediment buildup and premature wear.

Key details: Material: Polypropylene (PP) | Product Dimensions: 3.87"D x 3.87"W x 9.54"H | External Testing Certification: ANSI, NSF | Product Benefits: Helps reduce fine sediment before downstream filters ; Supports cleaner operation of carbon filters and softeners ; Designed for whole house and main water line installation ; Depth filtration captures particles throughout the cartridge ; Suitable for well water and municipal water pretreatment | Brand: Tier1 | Set Name: 6-pack | UPC: 635510407782 | Unit Count: 6 Count | Number of Items: 6 | Item Weight: 5.24 pounds

How it fits your day: Use the key specs and highlights above to match it to your setup, space, or routine before you check out.

Customer feedback: 4.7/5 average rating.

Customers say: Customers find the water filter to be of good quality, working effectively as a sediment filter, and appreciate that it saves money.

Review snippets: My house water supply comes from a city water system that is based on river water and needs a low-micron filter at times to help remove those small particles. I have found these to be great when paired with a / I am on a well and have two water filters in series to get the dirt/sediment out. After 2 months the first filter shows significant collection of red dirt. The second has to be looked over closely to see any

Product description Whole house water filter systems are placed on the main water line entering your home, and designed to remove rust, sediment, chlorine and other chemical contaminants from all water entering your home. So no matter where you are in your house, whether it’s the guest bedroom shower, outside hose, kitchen or bathroom sink, you and your family can have clean, healthy and great tasting water. Not only does a whole house water filter give you the luxury of clean great tasting water from every faucet in the house it can also help extend the life of appliances that use water, such as dishwashers, water heaters and washing machines, because it removes the sediment, chlorine and other contaminants that would otherwise be entering those appliances. Specifications Features Actual Size: 10 inches (length) x 4 1/2 inches (outside diameter) Media: Bonded Polypropylene Filter Life: 6 months Micron: 1 Flow Rate: 10 Designed to Fit Fits most standard 10 x 4.5-inch housings Contaminants Removed Particulates Sediment Comparable Part Numbers P1-10BB HYDRONIX SDC-45-1001 PENTEK-DGD-2501 SDF-45-1001 155359-43 TIER1-P1-10BB FPMB-BB1-10 Easy Installation 1. Turn off water supply. Press red pressure-relief button (if present) 2. Unscrew housing. Remove large o-ring, wipe clean and set aside 3. Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly 4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly 5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove 6.